fs50

FS50 SERIES PHOTOELECTRIC SENSOR

Opposed mode: sn=20m / 40m
Diffuse mode: sn=100mm-400mm / 20cm-1m / 20cm-1.8m / 30cm-2m
Retroreflective mode: sn=10m
Polarized reflective mode: sn=6m
House size: 50x50x18mm
FS50 SERIES PHOTOELECTRIC SENSORS SPECIFICATIONS(DC)

SENSING MODE/

ITEM

DC
Through-beam mode
Diffuse mode
Retro-reflective mode
Polarized reflective mode
Nominal Voltage
10-30VDC
Residual Ripple
<10%
Tolerance
¡À10%Sn
Hysteresis
10%
Emission
...............................................................Infrared(880nM)
red(660nM)
Output
NPN or PNP (programmable)
Contact
NO or NC (programmable).........
Max. Output Current
200mA
Absorption At 30VDC
40mA
Voltage Drop(Sensor On)
<2.0V(I=100mA)
Yellow LED
Output indicator
Green LED
Supply indicator
Sensitivity Adjustment
Trimmer 1 tum
Switching Frequency
200 Hz
Response Time
5mS
Start Up Delay
100mS
Short Circuit Protection
Yes
Electric Protections
Yes
Temperature Limits
-10 ~ +60¡æ
Light Immunity
>10.000Lux
Protection Degree
IP65
Cable Length
2m(4x0.25mm2)
Connect
Euro style
Sensing object
-
white paper
Reflectors D83
EMC
IEC 60947-5-2, Parts7.2.6.1.2.3 or RFI>10V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact)
Voltage Withstand Ability
IEC 60947-5-2, Part8.3.3.4 or 500VDC for one min, between all supply terminals connected together and enclosure
Insulation Resistance
>20M , With 500v dc megger between all supply terminals connected together and enclosure
Vibration Resistance
IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x, y and z directions for 30 min
Shock Resistance
IEC 60947-5-2, Part 7.4.1 or 30g 11ms in x, y and z directions for six time each
Weight-cable output-(connector)
-160g-(120g)
FS50 SERIES PHOTOELECTRIC SENSORS SPECIFICATIONS(AC/DC)

SENSING MODE/

ITEM

AC/DC
Through-beam mode
Diffuse mode
Retro-reflective mode
Polarized reflective mode
Nominal Voltage
12-240VDC / 24-240VAC
Mains Frequency
50/60Hz
Tolerance
¡À10%Sn
Hysteresis
10%
Emission
...............................................................Infrared(880nM)
red(660nM)
Output
Relay SPDT
Max. Output Current
3A/30V AC, 1A/220V AC
Power consumption
<2.5VA
Yellow LED
Output indicator
Green LED
Supply indicator
Sensitivity Adjustment
Trimmer 1 tum
Switching Frequency
10 Hz
Response Time
20mS
Start Up Delay
<300mS
Temperature Limits
-10 ~ +60¡æ
Light Immunity
>10.000Lux
Protection Degree
IP65
Cable Length
2m(5x0.30mm2)
Connect
Euro style
Sensing object
-
white paper
Reflectors D83
EMC
IEC 60947-5-2, Parts7.2.6.1.2.3 or RFI>10V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact)
Voltage Withstand Ability
IEC 60947-5-2, Part8.3.3.4 or 500VDC for one min, between all supply terminals connected together and enclosure
Insulation Resistance
>20M , With 500v dc megger between all supply terminals connected together and enclosure
Vibration Resistance
IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x, y and z directions for 30 min
Shock Resistance
IEC 60947-5-2, Part 7.4.1 or 30g 11ms in x, y and z directions for six time each
Weight-cable output-(connector)
180g (125g)
FS50 SERIES PHOTOELECTRIC SENSORS CONNECTION DIAGRAM
Wiring diagrams(DC) Emitter(DC)
__
Connection with connector (DC)
_____
Wiring diagrams(AC/DC) Emitter(AC/DC)
__ ____
Connection with connector (AC/DC)
__

FS50 SERIES PHOTOELECTRIC SENSORS DIMENSIONS (unit:mm)

 
___
Accessories

Vastly-e @ Copyright (C) 2009 All Rights Reserved

æµ™ICP备18006186å·