|
         |
|
 |
|
 |
FU31 SERIES PHOTOELECTRIC SENSOR |
|||
| Opposed mode: |  |
sn=5m, 10m (Narrow beam) | ||
| Diffuse mode: |  |
sn=300mm, 800 mm | ||
| Retroreflective mode: |  |
sn=3m(with polarizing filters), 1m(for transparent object) | ||
| House size: | 31x20x12mm | |||
| FU31 SERIES PHOTOELECTRIC SENSORS SPECIFICATIONS(DC) | |||||||
| type | Thru-beam |
Retrorefective |
Diffuse reflective |
||||
Thru-beam |
Narrow beam |
With polarizing filters |
For transparent object sensing |
Long sening range |
Short sening range |
||
| Sensing range | 10m |
5m |
0.1 to 3m |
50mm to 1,000mm |
800mm |
300mm |
|
| Sening object | φ12 mm or more opaque object | φ50 mm or more opaque | opaque, translucent or ransparent object | ||||
| Hysteresis | -- |
15 % or less of operation distance | |||||
| Repeatability (perpendicular to sensing axis) |
0.5 mm or less | 0.05 mm or less | 0.5 mm or less |
1 mm or less |
|||
| Supply voltage | 10 to 30 V DC 10 % Ripple P-P 10 % or less | ||||||
| Current consumption |
Emitter: 30 mA or less Receiver: 30 mA or less |
30 mA or less |
|||||
| Emitter: 30 mA or less Receiver: 30 mA or less |
|||||||
| Sensing output | NPN output type: PNP output type: |
||||||
| Utilization category | DC-12 or DC-13 | ||||||
| Output operation | Switchable either Light-ON or Dark-ON | ||||||
| Short-circuit protection | yes | ||||||
| Response time | 1 ms or less | ||||||
| Operation indicator | Red LED (lights up when the sensing output is ON) | ||||||
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) | ||||||
| Power indicator | Red LED (lights up when the power is ON) |
- | |||||
| Sensitivity adjuster | Continuously variable adjuster | ||||||
| Automatic interference prevention function |
- |
Incorporated (Two units of sensors can be mounted close together). |
- |
Incorporated (Two units of sensors can be mounted close togethe). |
|||
Environmental resistance |
Pollution degree | 3 (Industrial environment) | |||||
| Protection | IP67 (IEC) | ||||||
| Ambient temperature | -25 to+55 °C , Storage:-30 to+70 °C | ||||||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||||||
| Ambient illuminance | Sunlight: 10,000 #x at the light-receiving face, Incandescent light: 3,000 #x at the light-receiving face | ||||||
| EMC | IEC 60947-5-2, Parts7.2.6.1.2.3 or RFI>3V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact) | ||||||
| Voltage Withstand Ability | IEC 60947-5-2, Part8.3.3.4 or 500VDC for one min, between all supply terminals connected together and enclosure | ||||||
| Insulation Resistance | >20MΩ, With 500v dc megger between all supply terminals connected together and enclosure | ||||||
| Vibration Resistance | IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x, y and z directions for 30 min | ||||||
| Shock Resistance | IEC 60947-5-2, Part 7.4.1 or 30g 11ms in x, y and z directions for six time each | ||||||
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each | ||||||
| Emitting elementm | Infrared LED (modulated) | Red LED (modulated) | Infrared LED (modulated) | ||||
| Material | PBT | ||||||
| Cable | 0.2 mm2, 3-core (thru-beam type emitter: 2-core) oil resistant cabtyre cable, 2 m long | ||||||
| Cable extension | Extension up to total 100 m is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver). | ||||||
| Weight | Emitter: 45 g approx., Receiver: 50 g approx. | 50 g approx. | |||||
| FU31 SERIES PHOTOELECTRIC SENSORS CONNECTION DIAGRAM |
 Receiver: NPN output wiring diagram |
|
| Receiver: PNP output wiring diagram |
|
| FU31 SERIES PHOTOELECTRIC SENSORS DIMENSIONS(mm) | |
|
 |
Vastly-e @ Copyright (C) 2009 All Rights Reserved |
